Mobile Device Navigation

Metro SMART Estimate


SMART Estimate Disclaimer:
The SMART Estimate is provided merely as a 'Rough Guide' for distributors and contractors when ordering materials for inventory or to get an approximate idea of what is needed to install a Metro roof. Metro Roof Products assumes no responsibility for accuracy of this estimate due to the limited knowledge of the specific job. This estimate is based solely on mathematical formulas developed from actual California installations, and due to different architecture across America we strongly recommend you base your order for materials off of an actual drawing of the job you are estimating.

< back
MetroTILE
Estimating Formulas
Type Roof
Squares here
Roof Squares
STONE COATED ITEMS Formula X
Per SQUARE		 No of pcs.
or lin. ft.		 Per UNIT
Wgt lbs
Metro TILE panel STONE COATED 20.00 pcs 5.50
BARREL Trim Caps for Ridge, Hip & Rake STONE COATED 6.00 pcs 0.98
END Disc 'Barrel' Disc shape STONE COATED 0.3 pcs 0.15
FL-Drip Edge 2-1/4" X 3-1/4" STONE COATED 79" 0.9 pcs 1.60
SHAKE-TILE V-Bat Riser metal STONE COATED 79" 0.9 pcs 1.80
TILE Rake Metal 1-1/2" X 1/2" X 1-1-/2" STONE COATED 79" 0.916 pcs 3.50
TIE-In Metal 3" X 1/2" X 3" STONE COATED 79" as needed pcs  
Z-BAR Metal Small 1-3/8" X 3/8" STONE COATED 79" as needed pcs 2.00
FLAT Sheets 18" X 52" STONE COATED 52" as needed pcs 5.7
VALLEY Center Cover 4" STONE-COATED 79" 0.28 pcs 3.70
HEAD-Wall Metal 2-1/2" X 3" X 79" STONE-COATED 79" 0.47 pcs 3.30
SMART-Vent TILE 82-Sq In NFVA STONE COATED 52" as needed pcs 12.00
SMART-Jack 3-N-1 Small base fits pipes 1"-3" STONE COATED as needed pcs 1.00
SMART-Jack 3-N-4 Small base fits pipes 3" - 4" STONE COATED as needed pcs 1.10
SMART-Sleeve 3-N-1 fits pipes 1"-3" STONE COATED as needed pcs 1.00
SMART-Sleeve 3-N-4 fits pipes 3"-4" STONE COATED as needed pcs 1.10
PAINTED ITEMS Formula X
Per SQUARE		 No of pcs.
or lin. ft.		 Per UNIT
Wgt lbs
DOUBLE V Valley 20" Metal PAINTED 120" 0.18 pcs 12.50
SIDE-Wall Under pan Metal BARE 120" 0.309 pcs 5.00
2X2, 1X4 or 1X3 Panel Battens (Use if installed on battens) 100 pcs  
PAINT for roof jacks & pipes 0.07 spray cans 0.90
TOUCH-Up Kits 0.033 kits 3.90
SEALANT Tubes 0.218 ea 0.90
FASTENERS - Select size & type for job Formula X
Per SQUARE		 No of pcs.
or lin. ft.		 Per UNIT
Wgt lbs
*SMART-Fast Stainless Steel #10 X 2-1/2" HH Screws 1,500/Bx .180 Boxes 22
*SMART-Fast Stainless Steel #10 X 2" HH Screws 2,000/Bx .135 Boxes 22
CARBON Steel #10 X 2-1/2" HH Screws 1,500/Bx .180 Boxes 22
CARBON Steel #10 X 2" HH Screws 2,000/Bx .135 Boxes 22
16d BATTEN Nails Smooth Shank 3-1/4" X .131" 4k/bx (53lbs/Bx) .003 Boxes 53
16d BATTEN Nails Ring Shank 3-1/4" X .131" 4k/bx (53lbs/Bx) .003 Boxes 53
SUPER Black RING Shank 2-3/8" X .131" 4k/bx (40lbs/Bx) .07 Boxes 40
SUPER Black RING Shank 3" X .131" 4k/bx (53lbs/Bx) .07 Boxes 53
SPECIAL NOTE: These formulas are designed as a "Rough Guide" to estimate material quantities needed for a Metro roof job.
DO NOT rely on these formulas for final estimates. Actual lineal measurements should be taken from the job / plans itself.
* SMART-Fast screws carry a 50-Year Ltd., Warranty.

top
Site Map